2026 Updated EMC D-PST-DY-23 Dumps PDF - Want To Pass D-PST-DY-23 Fast

D-PST-DY-23 Practice Exam Dumps - 99% Marks In EMC Exam

NEW QUESTION # 127
During the discovery step of implementation, an unconfigured PowerStore is unavailable.
Which firewall ports must be open for a successful discovery?

• A. TCP port 5353 and UDP port 5353
• B. TCP and UDP ports 443 and 80
• C. TCP port 80 and UDP port 80
• D. TCP port 8443 and UDP port 5353

Answer: D

NEW QUESTION # 128
A Storage Administrator is doing a quarterly space audit on the company's PowerStore T. The Administrator notices that Vol-SMB004 was accidentally set to 5 TB when it should have been set to 4 TB. When going to change the size, the system will NOT accept the change.
What is preventing the change?

• A. Storage Administrator does not have permissions to shrink the volume
• B. Volume has snapshots
• C. Volume size cannot be decreased
• D. There is an active minor alert on the volume

Answer: C

NEW QUESTION # 129
An administrator is asked to protect a virtual machine using a protection policy.
Which statement is correct?

• A. The policy protects the underlying file systems and replication is supported.
• B. The policy protects the underlying vVols and replication is not supported.
• C. The policy protects the underlying vVols and replication is supported.
• D. The policy protects the underlying file systems and replication is not supported.

Answer: B

NEW QUESTION # 130
Which component of PowerStore is responsible for managing data placement and optimizing performance?

• A. Networking cards
• B. Storage media
• C. Management console
• D. Data nodes

Answer: D

NEW QUESTION # 131
When does a Protection Pokey have to be removed from PowerStore storage resource? (Choose two.)

• A. Before expanding volume capacity
• B. Before deleting a volume
• C. Before moving the volume to a protected volume group
• D. Before refreshing a Storage Resources from a Clone

Answer: B,C

NEW QUESTION # 132
A SQL Cluster with attached PowerStore storage has Volumes SQL1, SQL2, SQL4, SQL5 which all require write order preservation. The SQL administrator no longer requires SQL4 and has removed it from the database. The Storage Administrator goes to delete volume SQL4 and finds that the option is grayed out.
Why is the option to delete the volume unavailable?

• A. SQL4 still has replications
• B. SQL4 still has snapshots
• C. SQL4 was renamed from SQL3
• D. SQL4 is part of a volume group

Answer: D

NEW QUESTION # 133
During the unpacking of a new PowerStore 3000 X with two (2) expansion enclosures, the Implementation Engineer finds 2 meter SAS cables.
According to best practices for what are these cables used?

• A. To interconnect the base enclosure with the expansion enclosures
• B. To interconnect the base enclosure with the first expansion enclosure
• C. SAS cables are unsupported on PowerStore X
• D. For interconnecting the expansion enclosures

Answer: A

NEW QUESTION # 134
SIMULATION
Use the simulator to create an SMB NAS server using the following information:
* NAS and SMB computer name: payrollserver
* Network interface: BaseEnclosure-bond1
* IP address: 192.168.2.20
* Subnet: /24
* Gateway: 192.168.2.254
* VLAN: 1504
* AD/DNS: 192.168.2.50
* Windows domain name: company.com
* Domain administrator credentials: Administrator/password
When you have finished continue to the next question.

Answer:

Explanation:
See the Explanation below for complete solution
Explanation:
1. Open the simulator and log in with the default credentials: admin/Password123#.
2. SelectStorage>NAS Serversfrom the left menu.
3. Click+ CREATEto launch the Create NAS Server wizard.
4. Enterpayrollserveras the NAS and SMB computer name and clickNext.
5. SelectBaseEnclosure-bond1as the network interface and clickNext.
6. Enter192.168.2.20as the IP address,/24as the subnet,192.168.2.254as the gateway, and1504as the VLAN ID. ClickNext.
7. SelectJoin a Windows domainas the SMB server type and clickNext.
8. Enter192.168.2.50as the AD/DNS server,company.comas the Windows domain name,Administratoras the domain administrator username, andpasswordas the domain administrator password. ClickNext.
9. Review the summary and clickFinishto create the SMB NAS server.

NEW QUESTION # 135
Which two statements are correct about volume groups? (Select 2)

• A. Can be mapped to another volume group.
• B. Are logical containers for a group of volumes.
• C. A volume can only be a member of one volume group at a time.
• D. Are only supported for vVols.

Answer: B,C

NEW QUESTION # 136
A PowerStore user has a business need for file system snapshots of NAS Server NAS1 with the following attributes:
Taken M-F every 2 hoursOT
Retention of 2 daysOT
The snapshots must be accessible through the Previous Versions menu in Windows Using the PowerStore Simulator, make the appropriate configuration change.
When you have finished, continue to the next question.

Answer:

Explanation:
see the Explanation for the solution.
Explanation:
1. Launch the PowerStore Simulator and log in with the admin credentials.
2. On the left navigation pane, click Protection and then click Protection Policies.
3. Click Create Policy and enter a name and description for the policy, such as NAS1 Snapshot Policy.
4. Under Snapshot Rules, click Add Rule and configure the following settings:
5. Name: Enter a name for the rule, such as NAS1 Snapshot Rule.
6. Schedule: Select Custom and enter the following cron expression: 0 */2 * * 1-5. This expression means that the snapshots will be taken every 2 hours on Monday to Friday
7. Retention: Select Until and enter 2 days. This means that the snapshots will be deleted after 2 days.
8. Access Type: Select Snapshot. This means that the snapshots will be accessible through the Previous Versions menu in Windows
9. Click Save to create the snapshot rule and then click Next.
10. Under Replication Rules, click Skip. This means that no replication rule will be added to the policy.
11. Click Next and then click Finish to create the protection policy.
12. On the left navigation pane, click Storage and then click File Systems.
13. Select the file system that belongs to NAS Server NAS1 and click More Actions.
14. Click Edit and then click Protection Policy.
15. Select the protection policy that was created in the previous steps, such as NAS1 Snapshot Policy, and click Save.
16. Click Confirm to apply the protection policy to the file system.

NEW QUESTION # 137
Which two components of Port Group Policy, indicates that the initiator and target connectivity is set while provisioning a volume to an ESXi host using iSCSI connectivity? (Choose two.)

• A. Active
• B. 1QN
• C. ICompliant
• D. MPIO

Answer: A,C

Explanation:
Verify that the iSCSI VMkernel network adapter from the VMkernel adapters page is listed. The Port Group Policy must be Compliant and the Path Status Active, indicating that the initiator and target connectivity is set. (Page 18 POWERSTORE 3.0 IMPLEMENTATION - CONFIGURATION)

NEW QUESTION # 138
What is the key purpose of configuring remote replication for VMware storage resources in PowerStore?

• A. Reducing the need for CPU resources
• B. Enabling disaster recovery for VMs and data
• C. Improving virtual machine boot times
• D. Enhancing graphics rendering performance

Answer: B

NEW QUESTION # 139
Place the steps in the correct order to map a PowerStore volume to a NVMe host.

Answer:

Explanation:

NEW QUESTION # 140
Which network does the PowerStore Discovery Utility use to identify unconfigured appliances?

• A. Management
• B. IDN
• C. Internal
• D. ICM

Answer: A

Explanation:
PowerStore Discovery Utility and Network Usage
The PowerStore Discovery Utility is a tool used to find and initially configure unconfigured PowerStore appliances on the network. It uses the Management Network to perform this discovery.
Here's how it works:
mDNS (Multicast DNS): The utility relies on mDNS, a protocol that allows devices to discover each other on a local network without a pre-configured DNS server. This is essential for finding new PowerStore appliances that haven't been set up yet.
Management Network: The Management Network in PowerStore is dedicated to out-of-band management. It's the network used for:
Initial appliance discovery
Accessing the PowerStore Manager interface
Performing management tasks
Port 5353: Both TCP and UDP port 5353 must be open on the Management Network for mDNS to function correctly and allow the discovery utility to find the unconfigured appliances.
Why other options are incorrect:
A . IDN: IDN (Internal Dell Network) is not a standard term related to PowerStore discovery.
C . ICM: ICM (Internet Control Message Protocol) is a network protocol used for error reporting and diagnostics, not for device discovery.
D . Internal: While the term "Internal" might seem relevant, it's not specific enough. The Management Network is the precise network used for this purpose.
Dell PowerStore Reference
PowerStore: Discover and Configure a PowerStore Appliance: This document in the PowerStore documentation explains the process of using the Discovery Utility and mentions that it requires network access to the appliance's management IP address, which is on the Management Network.

NEW QUESTION # 141
Match the correct Base Enclosure port in column A to the Expansion Enclosure port in column B to show the correct cabling for adding a single expansion enclosure to a base enclosure.

Answer:

Explanation:

NEW QUESTION # 142
Which component is responsible for managing the access of ESXi hosts to vVols in PowerStore?

• A. Data node
• B. Network switch
• C. Host initiator
• D. vCenter Server

Answer: D

NEW QUESTION # 143
What is the maximum number of snapshot rules per cluster?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: A

NEW QUESTION # 144

An administrator is setting up a new ESXi cluster using NVMe over TCP. The administrator is given the following parameters:
Volume Details
Name: nvme-ds-01
Category: Virtualization
Application: Containers/Kubernetes
Volume Performance Policy: High
Size: 2 TB
Host Details
Name: ESXi-01
Initiator Type: NVMe
Host Mappings: NVMe
Use the simulator to add the host and the volume and give the host access to the volume using the above parameters.
When you have finished, continue to the next question.

Answer:

Explanation:
See the steps in Explanation.
Explanation:
1. On the simulator, click on theStoragetab on the left sidebar. Then click on theVolumessubtab. You will see a list of existing volumes on the cluster.
2. To create a new volume, click on theCreatebutton on the top right corner. A dialog box will appear where you can enter the volume details.
3. Enter the name of the volume asnvme-ds-01. Select the category asVirtualizationand the application asContainers/Kubernetes. These are optional fields that help you organize and identify your volumes.
4. Select the volume performance policy asHigh. This will optimize the volume for high performance and low latency. You can also customize the policy by clicking on theAdvancedbutton and adjusting the settings.
5. Enter the size of the volume as2 TB. You can also enable thin provisioning, compression, and deduplication if you want to save space and improve efficiency. Click on theCreatebutton to create the volume.
6. You will see a confirmation message that the volume has been created successfully. Click on theClosebutton to exit the dialog box. You will see the new volume in the list of volumes.
7. To add a new host, click on theHostssubtab on the left sidebar. You will see a list of existing hosts on the cluster.
8. To create a new host, click on theCreatebutton on the top right corner. A dialog box will appear where you can enter the host details.
9. Enter the name of the host asESXi-01. Select the initiator type asNVMe. This will enable the host to use the NVMe over TCP protocol to access the volumes.
10. To add the host mappings, click on theAdd Mappingbutton. A dialog box will appear where you can select the volume and the access type.
11. Select the volumenvme-ds-01from the drop-down menu. Select the access type asNVMe. This will map the volume to the host using the NVMe over TCP protocol. Click on theAddbutton to add the mapping.
12. You will see the mapping in the list of host mappings. You can add more mappings if you want to map more volumes to the host. Click on theCreatebutton to create the host.
13. You will see a confirmation message that the host has been created successfully. Click on theClosebutton to exit the dialog box. You will see the new host in the list of hosts.
14. You have completed the task of adding the host and the volume and giving the host access to the volume using the NVMe over TCP protocol. You can verify the configuration by clicking on the host or the volume and checking the details.

NEW QUESTION # 145
An administrator is connecting a Linux host to a PowerStore appliance and must know which storage network interface to use.
Which nvme subcommand should be used?

• A. attach-ns
• B. discover
• C. id-ccrl
• D. connect

Answer: B

NEW QUESTION # 146
......

The EMC D-PST-DY-23 exam covers a wide range of topics, including installation and configuration of Dell PowerStore systems, management of storage resources, data protection and disaster recovery, and advanced troubleshooting techniques. Candidates will be required to demonstrate their proficiency in these areas through a variety of question types, including multiple-choice, drag and drop, and simulation-based questions.

Updated Verified D-PST-DY-23 Q&As - Pass Guarantee: https://braindumps2go.dumptorrent.com/D-PST-DY-23-braindumps-torrent.html