Get Started: DES-6322 Exam [2022] Dumps EMC PDF Questions

DES-6322 Premium Exam Engine pdf Download

NEW QUESTION 49
A 2-node VxRail duster Is being deployed. Due to a preparation mistake, the host section fe missing. Use the VxRail simulator to fully deploy the cluster using the JSON file.
Node Names:
vcluster-esxO 15-vrack
vcluster-esxO 16-vrack
Starting IP
Address: 192.168.10.15
Rack Name: Virtual Rack
Rack Position: 15-16
Passwords: Passwordl23
!
ESXI Management
User: esxmgmt
When you have finished, continue to the next question.

Answer:

Explanation:

NEW QUESTION 50
What is a consideration when performing a VxRail software upgrade from version 4.7.xxx to version 7.0.xxx?

• A. VxRail Manager VM must be changed to the default name to avoid an upgrade failure
• B. External vCenter server must be upgraded after the VxRail is upgraded
• C. Secure boot must be enabled on the ESXi hosts for a successful upgrade
• D. vCenter Server requires a temporary IP address on a different subnet before the upgrade

Answer: B

NEW QUESTION 51
What is a valid 2-node VxRail cluster configuration?

• A. 2x 10 GbE and 2x 25 GbE in a direct-connect configuration and internal vCenter
• B. 2x 1 GbE and 2x 10 GbE in a switch configuration and internal vCenter
• C. 2x 10 GbE and 2x 25 GbE in a switch configuration and external vCenter
• D. 2x 1 GbE and 2x 10 GbE in a direct-connect configuration and external vCenter

Answer: D

NEW QUESTION 52
What is a consideration when performing a VxRail software upgrade from version 4.7.xxx to version 7.0.xxx?

• A. VxRail Manager VM must be changed to the default name to avoid an upgrade failure
• B. External vCenter server must be upgraded after the VxRail is upgraded
• C. Secure boot must be enabled on the ESXi hosts for a successful upgrade
• D. vCenter Server requires a temporary IP address on a different subnet before the upgrade

Answer: A

Explanation:

NEW QUESTION 53
An implementation engineer is expanding an existing VxRail E Series cluster with an additional node The version of the node is not at the current cluster level and is not compatible What action must be performed before adding the node?

• A. RASR Factory Reset
• B. Order node with correct image
• C. Compute node expansion
• D. RASR Factory Image Upgrade

Answer: B

NEW QUESTION 54
Which VxRail model(s) has a non-mirrored IDSDM?

• A. All G Series
• B. All E Series
• C. D560/F
• D. S570

Answer: A

NEW QUESTION 55
Where can an administrator find steps to perform a manual verification of the customer network?

• A. Pre-Engagement Questionnaire (PEQ)
• B. Dell Technologies SolVe Online
• C. Dell EMC VxRail Network Planning Guide
• D. Customer Simplified Form

Answer: B

NEW QUESTION 56
What is the recommended format for host names when using the VxRail Deployment Wizard for an External vCenter solution?

• A. FQDN for both vCenter Server and for VxRail Manager
• B. Host name for both vCenter Server and for VxRail Manager
• C. FQDN for vCenter Server
  Host name for VxRail Manager
• D. Host name for vCenter Server
  FQDN for VxRail Manager

Answer: C

NEW QUESTION 57
An implementation engineer places a VxRail node into maintenance mode using the Ensure accessibility setting What is the engineer likely planning to do?

• A. Shutdown of an entire cluster
• B. Temporary maintenance
• C. Extensive maintenance
• D. Permanent removal of host from cluster

Answer: C

NEW QUESTION 58
Match each IDRAC Maintenance page tab to its description.

Answer:

Explanation:

NEW QUESTION 59
An implementation engineer is in the validation phase of a VxRail deployment with two Dell EMC ToR switches. Which command should they run on each of the ToR switches to validate that Link Aggregation has been configured according to Dell best practices for VxRail node interfaces?

• A. show network-policy profile
• B. show interface
• C. show interface status
• D. show port-channel summary

Answer: A

NEW QUESTION 60
A systems engineer is performing a VxRail upgrade in a VMware Horizon VDI cluster All hosts are put in Maintenance Mode.
What action does the engineer need to perform on each host once the upgrade has been completed?

• A. From the Connection Server, run IcMaintcmd to take the hosts out of Maintenance Mode and reboot them
• B. From the Connection Server run IcMaintcmd to delete the parent VMs and exit Maintenance Mode for each host
• C. Set the InstantClone Maintenance annotation value to the original value
• D. Set the InstantClone Maintenance annotation value to 2

Answer: B

NEW QUESTION 61
Which VxRail model can only be installed with static rack rails?

• A. G Series
• B. S Series
• C. P Series
• D. V Series

Answer: D

NEW QUESTION 62
Match each component of the VxRail HCI System Software to its description.

Answer:

Explanation:

NEW QUESTION 63
A VxRail Test Plan has been completed What is the protocol for recording the results'?

• A. With the implementation team, complete each test and document the test date
• B. In front of a customer, complete and document each test, test date, and a screenshot of results
• C. In front of a customer, complete each test and document the test date
• D. With the implementation team, complete and document each test, test date, and a screenshot of results

Answer: B

NEW QUESTION 64
How must node ports on Dell EMC ToR switches be configured when the Spanning Tree Protocol is enabled in an environment?

• A. As edge ports
• B. In Forwarding status
• C. As access ports
• D. In Port-Channel mode

Answer: A

NEW QUESTION 65
Match each component of the VxRail HCI System Software to its description.

Answer:

Explanation:

NEW QUESTION 66
Match each VxRail data protection solution with its functionality.

Answer:

Explanation:

NEW QUESTION 67
Which command can be used from the VxRail Manager VM to restart the loudmouth daemon?

• A. systemctl restart vmware-loudmouth
• B. /usr/lib/vmware/loudmouth/bin/loudmouthd restart
• C. systemctl restart loudmouth
• D. /etc/init.d/loudmouth restart

Answer: A

NEW QUESTION 68
What is a benefit of using the VxRail REST API?

• A. Programmatically gather VxRail system health
• B. Automated security audits of VxRail clusters
• C. Remote upgrades of iDRAC related software only
• D. Polling for vSAN performance statistics

Answer: A

NEW QUESTION 69
From what environment must a network administrator run VxRail network validation?

• A. Same subnet as VxRail Management Network
• B. VxRail Deployment Wizard
• C. Top of Rack switches
• D. Windows PowerShell command prompt

Answer: C

NEW QUESTION 70
An implementation engineer is expanding an existing VxRail S Series cluster with an additional node. The version of the node is not at the current cluster level but is compatible.
What procedure would result in the quickest node addition?

• A. Factory Reset
• B. VxRail Node Imaging Management
• C. Compute node expansion
• D. RASR Factory Image Upgrade

Answer: C

NEW QUESTION 71
......

Pass Your EMC Exam with DES-6322 Exam Dumps: https://braindumps2go.dumptorrent.com/DES-6322-braindumps-torrent.html