Quick download
When you decide to buy a product, you definitely want to use it right away. The staff at 350-050 exam questions: CCIE Wireless Exam (V2.0) certainly took this into consideration. As long as your payment is successful, we will send a link to the product to your e-mail within five to ten minutes. If you have any problems installing and using 350-050 study engine, you can contact our staff immediately. You know, we have so many users. If you do not immediately receive a link from us, you can send us an email to urge us. We will use 350-050 exam simulating as soon as possible! Our system is very smooth and you basically have no trouble. We hope you enjoy using our 350-050 study engine.
Genius is 99% of sweat plus 1% of inspiration. You really don't need to think that you can succeed for nothing. If you still have a trace of enterprise, you really want to start working hard! 350-050 exam questions: CCIE Wireless Exam (V2.0) are the most effective helpers on your path. By using 350-050 study engine, your abilities will improve and your mindset will change. Who does not want to be a positive person? This is all supported by strength! In any case, a lot of people have improved their strength through 350-050 exam simulating. They now have the opportunity they want. Whether to join the camp of the successful ones, purchase 350-050 study engine, you decide for yourself!
Full service
As long as you choose 350-050 exam questions: CCIE Wireless Exam (V2.0), we are the family. From the time you purchase, use, and pass the exam, we will be with you all the time. You can seek our help anytime, anywhere. As long as you are convenient, you can contact us by email. If you have experienced a very urgent problem while using 350-050 exam simulating, you can immediately contact online customer service. Our staff will be on-line service 24 hours a day. I believe that you have also contacted a lot of service personnel, but I still imagine you praise the staff of 350-050 study engine. They have the best skills and the most professional service attitude. He can solve any problems you have encountered while using 350-050 exam simulating. You don't have to worry about your problems too much or too simple. Our staff will give you a smile and then answer them carefully. All we do is just want you to concentrate on learning! Let other things go to us.
99% pass rate
350-050 exam questions: CCIE Wireless Exam (V2.0) have a 99% pass rate. What does this mean? As long as you purchase 350-050 exam simulating and you are able to persist in your studies, you can basically pass the exam. This passing rate is not what we say out of thin air. This is the value we obtained from analyzing all the users' exam results. It can be said that choosing 350-050 study engine is your first step to pass the exam. If your job is very busy and there is not much time to specialize, and you are very eager to get a certificate to prove yourself, it is very important to choose a very high learning product that passes the rate. I know that the 99% pass rate of exam simulating must have attracted you. Do not hesitate anymore. You will never regret buying 350-050 study engine!
Cisco 350-050 Exam Syllabus Topics:
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Wireless Security | 20% | - Encryption: WPA2, WPA3, 802.11i, 802.11w - Rogue AP detection, classification, and mitigation - Authentication: PSK, 802.1X/EAP, EAP-TLS, PEAP, EAP-FAST - Identity services and ISE integration |
| Topic 2: Monitoring, Troubleshooting, and Automation | 15% | - Network management: Cisco DNA Center, WLC GUI/CLI - Performance monitoring and spectrum analysis - Common connectivity and performance issues - REST APIs, Python, and automation basics |
| Topic 3: 802.11 Technology Fundamentals | 15% | - IEEE 802.11 standards: a/b/g/n/ac/ax - Coexistence and spectrum management - MAC layer operations, frame types, and exchange mechanisms - PHY layer technologies and modulation schemes |
| Topic 4: Network Services and QoS | 15% | - High availability and redundancy - Multicast and broadcast optimization - QoS policies and DSCP mapping - WMM, TSPEC, and traffic classification |
| Topic 5: RF Fundamentals | 15% | - Regulatory domains and frequency bands - Radio wave propagation and characteristics - Antenna types, radiation patterns, and polarization - RF measurements: RSSI, SNR, noise floor, interference |
| Topic 6: Wireless Network Architecture | 20% | - Roaming mechanisms: 802.11r, 802.11k, 802.11v - AP modes: local, FlexConnect, monitor, sniffer, bridge - Cisco Catalyst 9800 and legacy WLC deployment models - Autonomous vs. split MAC architecture |
Cisco CCIE Wireless Exam (V2.0) Sample Questions:
1. Company XYZ needs to establish network connectivity to a newly acquired, adjacent building less than 1 kilometer (3280 feet) away. The project calls for implementing a wireless solution using autonomous access points in a point-to-point bridging solution using external antennas on interface dot11radio1. You need to secure the bridge link with strong EAP, DOT1x, and WPA methods, using a local RADIUS server. However, the link cannot be established and the following message is observed in the logs: "DOT1X_SHIM-3SUPP_START_FAIL: Unable to start supplicant on Dot11Radio1." What is most likely the root cause?
A) The non-root bridge is not configured for WPA key management.
B) The RADIUS service on the root bridge is not started or needs to be restarted.
C) The non-root bridge does not have the correct authentication credentials configured.
D) There is RF interference corrupting the 802.11b/g RF signal.
2. Refer to the exhibit.
Which statement about this Cisco WCS wIPS configuration is true?
A) Cisco WCS, a Cisco WLC, Cisco MSE, and an AP in FlexConnect mode are required to detect these wIPS signatures.
B) Cisco WCS, a Cisco WLC, Cisco MSE, and an AP in enhanced local mode are required to detect these wIPS signatures.
C) APs in monitor mode are required to detect these wIPS signatures.
D) Only a Cisco WLC and an AP are required to detect these wIPS signatures.
3. A clause 15 radio uses ___________ and supports data rates of ___________ .
A) FHSS, 1 Mb/s and 2 Mb/s
B) FHSS or DSSS, 1 Mb/s up to 11 Mb/s
C) DSSS, 1 Mb/s up to 11 Mb/s
D) DSSS, 1 Mb/s and 2 Mb/s
4. Location tracking and positioning systems can be classified by different techniques. Which statement is true?
A) The ToA technique requires very precise knowledge of the transmission start times. To simplify this technique, TDoA does not require the use of a synchronized time source at the point of transmission, but the receivers still require time synchronization.
B) RSS is measured by either the mobile device or the receiving sensor. Knowledge of the transmitter output power allows you to calculate the distance between the two stations.
C) The LTP field in the CCX Payload information allows synchronization between transmitter and receivers to allow calculation of the position within 10 meters during 90 percent of the time.
D) A common benefit of AoA compared to the other location tracking techniques is its susceptibility to multipath interference, which allows several angle calculations and therefore very accurate positioning.
5. Which of the below parameters are used in calculating the range - maximum distance - of an outdoor link between two bridges? Choose two.
A) The bridge transmission power.
B) The modulation type.
C) The cable length between bridge and the connecting switch.
D) The length of the antenna.
E) The outside temperature.
Solutions:
| Question # 1 Answer: C | Question # 2 Answer: C | Question # 3 Answer: D | Question # 4 Answer: A | Question # 5 Answer: A,B |
Free Demo






